Snowmobile World banner

2004 Polaris Touring- install primer

4K views 1 reply 2 participants last post by  SnoKing 
#1 ·
I would like to install a primer on a 2004 Polaris Touring snowmachine but am not sure how to connect it to the carborator or if there is a part that I can buy to put between the carborator and the engine. Can anyone make a recommendation on how to got about this project. It is needed as the machine is hard to start in the Alaskan cold weather.
 
#2 ·
My son's race sled was always hard to start when is had set for awhile
. We just opened the hood and poured some fuel in the air breather. I assume this occurs when it has set over night. If it is a problem when you are out and stopped for an hour or so I would carry a squeeze bottle of fuel on the sled or a can of starting ether.




If you still want a primer just run the hose into the breather instead of the carb.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top