2000 Yamaha Phazer - Snowmobile World : Your #1 Snowmobile Forum
Reply
 
LinkBack Thread Tools
post #1 of 23 (permalink) Old 11-13-2006, 03:45 PM Thread Starter
Senior Member
 
trx450r's Avatar
 
Join Date: Oct 2005
Posts: 445
I am looking for some info on what type of mods I can do for cheap on a 2000 Mountain Lite.

I have access to machine shop so I can mill the heads. Anyone have any specs?

How about some used performance exhaust?????

Another idea I have been kicking around it widening the front end. I assume it would entail more than just replacing the tie rods, radius rods and shocks... I guess what I'm really wondering is the mounting plate for the trailing arms the same on the regular Phazer and the Mountain Lite?


Will other Yamaha skis bolt right on this thing? I would like to ditch the stock skis and get something that will turn a little better...

This will be a flatland trail sled....


Thanks!

Blaine

2002 ZR 600
2 Degree Ignition Key
Balanced Primary and Secondary Clutches
Heel Clicker weights with Billet Cover
144 Woody's Studs
8" Carbides
Remote res. front shocks and front skid shock

2004 Honda TRX 450R
Tons of mods....

1986 Honda XR 80R
Yard Racer...
trx450r is offline  
Sponsored Links
Advertisement
 
post #2 of 23 (permalink) Old 11-15-2006, 09:13 AM Thread Starter
Senior Member
 
trx450r's Avatar
 
Join Date: Oct 2005
Posts: 445
ttt....

2002 ZR 600
2 Degree Ignition Key
Balanced Primary and Secondary Clutches
Heel Clicker weights with Billet Cover
144 Woody's Studs
8" Carbides
Remote res. front shocks and front skid shock

2004 Honda TRX 450R
Tons of mods....

1986 Honda XR 80R
Yard Racer...
trx450r is offline  
post #3 of 23 (permalink) Old 11-15-2006, 03:03 PM
Senior Member
 
Join Date: Dec 2005
Posts: 347
usually when you mill your heads you should rechamber them at the same time.
sl1pl1kespac3 is offline  
post #4 of 23 (permalink) Old 11-16-2006, 09:02 AM Thread Starter
Senior Member
 
trx450r's Avatar
 
Join Date: Oct 2005
Posts: 445
Quote:
usually when you mill your heads you should rechamber them at the same time.
[/b]

It depends on the squish volume...

That is the specific type of info I'm looking for....what is the squish clearance (lowest with premuim pump fuel).

Thanks

2002 ZR 600
2 Degree Ignition Key
Balanced Primary and Secondary Clutches
Heel Clicker weights with Billet Cover
144 Woody's Studs
8" Carbides
Remote res. front shocks and front skid shock

2004 Honda TRX 450R
Tons of mods....

1986 Honda XR 80R
Yard Racer...
trx450r is offline  
post #5 of 23 (permalink) Old 11-16-2006, 09:51 AM
Senior Member
 
rvanderklok's Avatar
 
Join Date: Dec 2004
Posts: 663
Remove the 500 motor, and carefully massage a VMAX 4 800 motor in there.... :hallo1:
rvanderklok is offline  
post #6 of 23 (permalink) Old 11-16-2006, 03:46 PM
Senior Member
 
Join Date: Dec 2005
Posts: 347
you can check the your current squish with some solder wire..... i dont know how much you can mill off the head to be in the safe zone with the squish but prehaps some one else can on here
sl1pl1kespac3 is offline  
post #7 of 23 (permalink) Old 11-17-2006, 09:05 AM Thread Starter
Senior Member
 
trx450r's Avatar
 
Join Date: Oct 2005
Posts: 445
Thanks!

Familiar with the solder method...

I just started with the Yamaha thing and I can't seem to find much info....

Sure hate to go into it blind and mow to much off...fan cooled sled on race gas?!?!? :dazed:

2002 ZR 600
2 Degree Ignition Key
Balanced Primary and Secondary Clutches
Heel Clicker weights with Billet Cover
144 Woody's Studs
8" Carbides
Remote res. front shocks and front skid shock

2004 Honda TRX 450R
Tons of mods....

1986 Honda XR 80R
Yard Racer...
trx450r is offline  
post #8 of 23 (permalink) Old 12-05-2006, 01:06 PM Thread Starter
Senior Member
 
trx450r's Avatar
 
Join Date: Oct 2005
Posts: 445
TTT again!!!

2002 ZR 600
2 Degree Ignition Key
Balanced Primary and Secondary Clutches
Heel Clicker weights with Billet Cover
144 Woody's Studs
8" Carbides
Remote res. front shocks and front skid shock

2004 Honda TRX 450R
Tons of mods....

1986 Honda XR 80R
Yard Racer...
trx450r is offline  
post #9 of 23 (permalink) Old 12-05-2006, 10:06 PM
Senior Member
 
snofrog's Avatar
 
Join Date: Sep 2002
Location: just south of the snowbelt
Posts: 2,884
you could do some port work ,clutchkit , pipes .just remember it is air cooled and you are whooping a dead horse to get a lot of power out of it .
snofrog is offline  
post #10 of 23 (permalink) Old 12-09-2006, 07:33 PM
Member
 
Eric1158's Avatar
 
Join Date: Jan 2006
Posts: 43
Afraid I can't give you any helpful information at this time but I have a related question.
Do the 2000's have canted (tilted) plugs like the earlier Phazers? I'm looking for a way to machine my (1991) heads but the only way I've seen to cut them down is chucking them in a lathe using a custom fixture. Straight plug heads are simple.

Will you be using a lathe or mill? Just looking for some ideas.

Thanks
Eric1158 is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Snowmobile World : Your #1 Snowmobile Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome