96 MXZ 583... its very hard to pullstart (as in hard to pull the starter rope.. only with two hands... even harder than a 2002 800). *I heard that the starter assembly can be replaced with one that contains a larger pulley making it as easy to pull as a newer 600. *I also was quoted a price at a local dealer (Canadian) at $300. *This seems quite expensive upgrade to me... is there anything I can do myself to rebuild it to make it easier, or anyone have a used one that would fit, or...? *Reason I ask is that I want to make this sled the wife's next year... I am liking that REV&#33http://www.snowmobileworld.com/forums/iB_html/non-cgi/emoticons/wink.gif... and she could never start it the way it is.

Try salvage www.snowmobileparts.com. I phoned these guys and the had some hard to find parts for the boys 82 polaris and had good prices too. * * * For a new pull stat it sounds about right because I think you would need the *housing and the hub for the crank.

It's definately worth the money. I upgraded my 95 670. the difference is night and day. One hand sitting on the sled, from two hands and a foot for bracing. You need recoil assembly, adapter ring and rubber ring. All said and done closer to $500.00 Can. You can use your old hub.

Yeah my 98 670 doent pull too easy either. I guess its a safety device since my 18 year old sister cant even come close to pulling it over lol. Shes no wimp either, 6th in the state in the 200m dash.
* * * * * * * * *Ryan

Thanks for the info.... since I want to keep the sled for the wife, I will have to spring for it.

I had a 583 and it wasn't hard to pull over, nowhere near the 670, until I put on a tight belt and then it tightened up the clutches.Before you spring for a new starter assembly take off the drive belt and see if it is easier to pull over.

Thanks for that site! *I was studding my machine tonight when I noticed I had some broken components in my skid! http://www.snowmobileworld.com/forums/iB_html/non-cgi/emoticons/mad.gif * I have a race Sunday and am hoping to have this fixed by then! *Thanks again!

This hard to pull "feature" is normal for this model/year... supposedly ski-doo changed it after only 2 years. *I have pulled on a 670 and its ALOT easier to pull than on my machine. *I called some local dealers... the "unsmart one" (not getting my business) said its not doable. *Another dealer said that if I bring in my existing unit, they can rebuild it into an easy pull one for $175 CDN. *Once I pay for my new pistons, rings, etc (another story) I will do this.