Over my break we dropped the rear arm of my skid to the bottom hole on that bracket. Can it ride like this or is it a ticking time bomb? It sure makes the back end ride high and look mean!! http://www.snowmobileworld.com/forums/iB_html/non-cgi/emoticons/biggrin.gif *http://www.snowmobileworld.com/forums/iB_html/non-cgi/emoticons/biggrin.gif

It's pretty doubtful you'll have any problems.

You won't have any problems. It will most likely cause you to change your limiter strap setup to get your handling where you want it.

my mach 1 a$$ end sit high set thos straps so you have some weight on the skis *mine are set on the 3rd from the bottom. might even put it on the 4th to see if its any better! 5 more days RANGELEY ME burb buuuuurb,

I just dropped my rear suspension on my 2001 Summit using the brackets from Kinetic in Spokane and it made it real simple.Only took a half hour and appears to probably stiffened up the factory bracket by sandwiching it.They only run about $45 U.S..I gained alot more ride height,running board clearance,and track clearance.