first it runs good cold than when it warms up it has no low end (wont spin or go up any hills) but mid range topend is still fine

second my front rubber wheeles on my track have no rubber coating left on them how hard is it to fix and how much will it be i am going to do the work my self

I had a similar problem once upon a time. I'd check first your plugs. If their fouled out, your missing bottom end. Second, and my problem, were the points, when they wear machine has trouble idling and lacks low end, once up to speed it wasn't bad, but no low end, pretty much what you state. I know from experience that points are a bugger to change on that machine, have to yank the entire motor out

cheap to change wheels under neither but your problem could be high idle wont let it go down low :cussing:

isn't the 83 377 cdi not pionts
i will try the idle once i get some boggey wheels

thanks for the help

i just went to take the boggey wheels off and broke a bolt off in the shaft its down in the hole some i dont know if i can get it out i am getting a easy out tonight but i think i am going to need a new shaft how much would a used one be

your just sinking deeper and deeper arn't ya buddy?? :D

Used shaft could be from $20 - $100 canadian.

i called about the shaft i can get a used shaft and wheels for $30 canadian i will only get the wheels if they look good,if not the new wheels are 15 each