My bros bent(kinked) one of the DSA arm on the brake side of my STX :cussing:

I could get one for RoyalDistributing for $80

I could also get one form 97 Mach,FIII and 95 FZ $50-80,those are chromoly and I am sure mine are metal

The FZ are Red and FIII are Purple they are cheaper then the Machs $80 which are black like mine

What are your thought???
SWRules

When my bother hit one of those little green telephone boxes with his 99 mxz he bought the replacement out of dennis kirk because it was cheaper that the dealer. Then we just painted the other one black to match.

Originally posted by 98mxz583@Jan 30 2003, 08:45 PM
bought the replacement out of dennis kirk because it was cheaper that the dealer. *Then we just painted the other one black to match.
:withstupid: They work fine and can not tell the difference after painting. :thumbsup:
If you want them a little stouter then fill em up with that spray insulation that expands. Drill small hole fill and go.

Boondock i would advise against stiffening the arms up as they are designed to be a crumple zone now. Not like the ARM's of the past that where much stronger. I would rather gimp my Arm than the bulkhead and tunnel, which is what used to happen all the time before they designed them to bend. I had to put a new trailing arm on a 02 800 renegade yesterday. The post was also bent a bit but the tunnel and bulkhead were fine. Had to massage the post back into place.

I HAVE ONE FROM A 98 MACH Z FOR 50.00 PLUS SHIPPING EXCELLENT CONDITON. IF YOU WANT IT. PM ME

Originally posted by 800ski@Jan 31 2003, 03:01 PM
I HAVE ONE FROM A 98 MACH Z FOR 50.00 PLUS SHIPPING EXCELLENT CONDITON. IF YOU WANT IT. PM ME
Thanx :) but it won't fit the 98 had ADSA

I need one for 93-97 DSA F2000 chassis

Sorry thought it was for the dsa. My bad. Dont go aftermarket have never seen any stay together. Good luck