prox440
02-18-2002, 04:27 PM
Can some one please tell me if they know of some one who makes pipes that will fit a 02 pro x 440 fan PLEASE PLEASE
Does any one know if they make 440 pipesnumberone 05-05-2002, 10:23 PM your single pipe will give you the best torqe, i would just get a good clutch kit, it wont hurt top speed. if you are looking for more top speed, gear up, this will be the best way to get it. even with a good kit you can gear up without losing power. 1000-IMP 05-22-2002, 07:19 AM I have never seen it done, but what says you cannot port a fan cooled engine? * engine temp would be the biggest prob, but i am pretty sure it wouldn't kill the engine. * * *In the 70's(haha i wasn't even born yet), they ran a lot of 800 triple fan cooled(or open air cooled) engine, and those thing were prolly ported, so i cannot see why you cannot port that 440 fan. * * *it still won't even be close to a liquid sled though. numberone 05-26-2002, 02:15 AM 1000imp *i have a friend who has a 488 trail that is ported and single performance pipe and that thing kiks but. for a long time he could not be beaten by the liq. 440 or 500. * *http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/thumbs-up.gif prox440 05-30-2002, 12:23 AM Is it lound and where could I get *it ? numberone 05-30-2002, 10:41 PM slp single pipe, it is loud, but not overberring. get trail porting done and this single pipe and you wont believe the boost in power. if you have a prox, you already have an execellent start. GOOD LUCK. prox440 05-30-2002, 11:24 PM I looked and I cant find a pipe or the other thing where did you find it what site startinglinep and could not find any ? prox440 05-30-2002, 11:26 PM I went to startinglineprodusts.com numberone 06-02-2002, 06:43 PM try these guys first. www.hotseatperformance.com *i'll try to get slp for you and get back to you later. *ps> also try *trycitypolaris.com . not sure if it's (tri )or (try). prox440 06-02-2002, 11:22 PM I tryed hotseat they said they dont have any 800MXZ 06-03-2002, 11:27 AM I think the place that you should try is probably Aaen. They could probably build you a set of pipes, and they have a large Polaris knowledge. As far as porting goes, you would be fine with it. You just can't run it quite so lean in order to keep everything cool.
Personally, Allot of used XC motors for sale on places like Amsnow. A 700 VES ProXC would be awesome with 440F stickers!! numberone 06-03-2002, 11:04 PM PROX440, iCANT FIND ANY PIPES UNDER SLP EITHER? MXZ800 IS PROBLABLY RIGHT, YOU MIGHT HAVE TO GET THEM CUSTOM MADE. GOOD LUCK prox440 06-04-2002, 12:54 AM Hey mxz 800 do them guys have a web site or anything or phone number and where are they from?? Thanks so much M10rules 06-06-2002, 12:59 AM prox--give me an email and I will try to get you the formula for making pipes if you want to do it that way.
h_d_dieterman@hotmail.com | |