zr580s rule
01-21-2002, 10:59 PM
okay here it is:
i have a 96 Zr 580 EFI the primary clutch is a new 9-post style with a yellow/green spring with 51.5 gram notched weights and the secondary is stock with the 51 degree helix the problem is that under hard acceleration the sled severaly over-revvs. *it revs about 8600 rpm till about 50 mph then it drops down to about 8000-8100 very quickly. *the belt is brand new both the clutches have been gone through and are clean i dont know what else i can do i am pretty sure that my belt is not slipping because i tried a softer compound belt and it didn't affect my operating rpm's at all i dont know if i should throw some more weight in the primary or what
what will changing from a 51 to a 53 degree helix do for me?
any help will be appreciated (especially since my dealer doesn't know crap about these sleds)
i have a 96 Zr 580 EFI the primary clutch is a new 9-post style with a yellow/green spring with 51.5 gram notched weights and the secondary is stock with the 51 degree helix the problem is that under hard acceleration the sled severaly over-revvs. *it revs about 8600 rpm till about 50 mph then it drops down to about 8000-8100 very quickly. *the belt is brand new both the clutches have been gone through and are clean i dont know what else i can do i am pretty sure that my belt is not slipping because i tried a softer compound belt and it didn't affect my operating rpm's at all i dont know if i should throw some more weight in the primary or what
what will changing from a 51 to a 53 degree helix do for me?
any help will be appreciated (especially since my dealer doesn't know crap about these sleds)