All the lights and guages went out on my Mach Z. I had noticed that the guages started to flicker last time I rode, but today when I came back out to ride, after a break it started and nothing worked. Thanks for any help!!!

Sounds like something came unpluged or wire broke. Check out all wireing then Stator, Regulator. The voltage regulator could have went out. Unplug the wires then check voltage, should be around 12.4 volts

Text deleted. Information not pertinent to this discussion.

try looking at the heated grips i have a f111 700 and it did the same thing so try shuting the heater off or looking at the grip's wires under the hand grip

Careful of takin off the handle grips. I heated mine and tore them off a couple days ago and ripped the heating pad right off. ??? So the next one i pulled off i cut carefully with a surgical knife and that went great :D . Don' t know much about the electrical department. just thought i'd warn you about the grips. oh yeah, dwiedle, i hope you and mac48370 are friends. those are some harsh words. My buddy has a Formula III 800 and it is nasty. and before you ask. i do have a mach z :sly: . considering you know what kind of sled he rides i take it you guys are friends though :D

;) Now i'm really confused I went out today to move it and it has lights and guages. I have already ordered a new stator but now it seems ok. I just dont know what to do!! Maybe it's time to take it to the dealer?

:D Check the bundel of wires that run from the hood down the inside of the inershock tower and go under the motor mine was doing the same thing and the wires had rubed through and was shorting out when i hit bumps