|
|
||
|
: Ohms Readings For Stator And Timing Sensor KILLER CAT 03-10-2003, 11:02 PM Looking for the Ohm readings for a 96 ZRT 600.. I need the readings for the stator and the timing sensor..and which wires to test THANKS Darryn Duncan 03-10-2003, 11:51 PM I don't know if it will be the same but my 95 zrt800 ohms are as follows: Ignition coil primary .34ohms +-15% + positive spade terminal - negative spade terminal single lead coil 7900ohms +-20% +high tension lead -white primary lead dual lead coil 7900ohms +-20% " -high tension lead charge coil (1) 479ohms +-20% +green -white charge coil (2) 25.7ohms +-20% +green -black lighting coil .21ohms +-20% +yellow -yellow ignition timing sensor 190ohms +-20% +green/white -brown sparkplug cap 5000ohms +-20% +cap -cap ignition timing 27BTDC @4000rpm 4.3mm (.172") hope this helps | ||