|
|
||
|
piped bravo 09-27-2003, 05:42 PM hey guys how do you mesure the angles of the helix.....had one given to me and all the guy said was its for a 700 tripple. Dynamo^Joe 09-27-2003, 06:42 PM you can wrap a piece of paper around the outer diameter of the helix... use a very sharp pencil to trace the angle surface against the paper... use a cheap protractor and you can get within a degree... the farther the spread of angles on a progressive helix, the more difficult it is. ...especially when the degrees are more than 10 good luck ;) piped bravo 09-29-2003, 02:47 PM thanks.... :) hillpounder 10-04-2003, 10:05 PM A guy at snowest posted this, checked it against a known cam and it was pretty darn close. | ||