My 95 Form Z 583, usually starts after one or two primes. *Since I am in Minnesota, and have not had the snow to ride. *It has sat for over three months. *I tried to start it tonight. *No luck. *When I used the primer, nothing happened. *Am I pushing air!!!! *How many times can I safely push on the primer without causing problems. *Any Advise.

Thanks
Scott

If it is just air...push all you want...push till you feel gas going through....you know the rest...do the password thing.. http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/tounge.gif *http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/biggrin.gif

In this kind of a starting situation, I usually raise the hood and watch the small diameter primer lines as I pump the primer. . you can see if gas is going through them up to the carbs as push on the primer, providing you have enough gas in the tank for the primer to pick up?? *http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/tounge.gif