Apexaholic
11-16-2003, 05:45 PM
Went to move my steering to the forward postion and low and behold no holes.
I looked in manual and eveything and shows them there .
But sled dont got them.
So I did some measuring and drilled thm myself.
I like it alot, much better than the rearward stock postion.
Me being 6ft 3 tall is a apin in the back where my 03 was allways hunched over to stand up.
I will post pics tomorrow.
Scott
paul yarek
11-16-2003, 05:51 PM
are you sure that on an "X" package that the bars are not already in the furthest forward position ? :confused:
Apexaholic
11-16-2003, 05:56 PM
Hey Andy I ho[e you and Renee had a good time last night.
Monique and I really liked having you over for dinner, and talking about everything.
Hope to be able to do it real soon again.
Scott and Monique
mxzx121
11-16-2003, 06:04 PM
I drilled holes to move mine forward.
Apexaholic
11-18-2003, 11:52 AM
I have pics at home I will post tonight.
Scott
rob7374
11-18-2003, 12:15 PM
Yes please post the pic's. Being 6'6" I'm interested in trying this on my 04 X.
REV X
11-19-2003, 11:58 AM
Tried to do the same on my 04 Ren X and no holes, but it seemed to me to be a tight fit between the steering post and some insulation on the back of the head light already in the back position, isn’t there contact when you move the steering post forward? And isn’t the post fixed with four bolts vertically at the bottom? (non adjustable)
Don’t you think it has no holes for adjustment for a reason? (what ever that might be)
Just curious and would really like to se some pics of it.
Mike
DAVE7625
11-19-2003, 01:25 PM
Originally posted by 800XRev@Nov 18 2003, 11:52 AM
I have pics at home I will post tonight.
Scott
Any pics yet?
mattie
11-19-2003, 02:50 PM
I picked up a Summit windshield for my '04' 800X Renegade. I assume, if I move the handlebars up the way everyone is describing....it's gonna knock the $h*t out of the fixed windshield?
True?
Look forward to the pictures tonight!
Apexaholic
11-19-2003, 08:31 PM
Having issues with posting my pics, my main computer puked so I am using my laptop now and have no programs on it as of yet.
I will post pics as soon as I get programs on laptop.
Sorry
Scott
renegade8x
11-20-2003, 07:04 AM
Thanks for the Step by Step pics Andy Thats Great!!!
I'll be looking forward to some riding reports from you for the Midland area.
renegade8x
11-20-2003, 07:06 AM
Hey ANdy where are you putting your permit on that sled....Post a Pic once you get it on. Thanks
Apexaholic
11-20-2003, 09:45 AM
Great going Andy , looks great same as mine but back together.
I have been busy in the shop , so not much time to mess with my sled.
Have to finish studs, going 192 fug it !.
nEED A 1-11/16 HOLESAW to finish installing my fuel gauge , everything elese done.
Later.
Scott