I'm looking to buy some anti-ratchet drivers for my 2000 summit 700. Any one know what size the drive shaft is, and what brand is a good. Also should I get the drivers that drive off the track lugs and the clips, or just the track clips. Any info is apperciated!!!

Thank you!!! SWRules

1.25" or 1 1/4 inches. Go with the dual purpose drivers as long as all the track windows are open.

Thanks Chubby, my track is open every window and clipped. If I use dual purpose drivers, will I have to take the 2 inner drivers off? Does anyone have a preference in brand of drivers?

Thank you


Summit33

All 4 original equipment drivers will be removed when being replaced by new the combo drivers. Give me a min and I will post a link for you.

Link at bottom of this post.

After entering Royal Distributing you will see ONLINE ORDERING under the Canadian flag
Click on ONLINE ORDERING.
Then click on to 2004 Snowmobile.
At the top of the page it will then say GO TO PAGE #___ Put in 152. What your looking for is at the bottom.

Hope it helps.

Let me know if it works for you.

:) Hello


Anti Ratchet drive sprocket ( No Slip Drivers ) .

SWRules

Hope im wrong,but, my buddie just ordered a set of those from whals,when they came in they had a shaft diameter of 1.25 or 1 1/4.They were too big for his 2001 mxzx 800,they told him he needs 1.104 or something like that,better double check yours.They are on back order at royal anyway,waiting for a set for mine (mach z,which is 1.25)

Thanks for the heads up.

Originally posted by john breedon@Dec 2 2003, 06:39 AM
Hope im wrong,but, my buddie just ordered a set of those from whals,when they came in they had a shaft diameter of 1.25 or 1 1/4.They were too big for his 2001 mxzx 800,they told him he needs 1.104 or something like that,better double check yours.They are on back order at royal anyway,waiting for a set for mine (mach z,which is 1.25)
My 02' MXZ 's shaft measures 1.1". I used the 1 1/16" drivers with no problems at all.

Brian