Well here is the problem last spring i decided to be an idiot and try to learn how to jump well guess what i broke the shock and bent it to an L and broke it right off from the welded rear arm. Luckily it was the last snow. to make this long story short i finally got he parts , pulled the suspension and after unbolting the rear arm it fell down and now i dont know which way the the spring on each side of the shock is suppose to sit. the long end goes into the slot in the front of the suspension but the short rear part of the spring is where i come in to a problem. The plastic peice can spin freely and i dont know what side the spring will rest on. If i have explained myself clearly enough does anyone understand or can help. A picture would be niceror anywhere i can look at this suspenion diagram or picture on the web thanks to anyone with help .
mark

Go to www.ronnies.com/micro.htm (http://www.ronnies.com/micro.htm) you'll find the diagram.

Hope that helps,
Darrell

well, that helped me out a little bit but also makes my question alot easier so what position does the cam adjuster need to be in with the spring? thanks mark