|
|
||
|
00 MachZ&MXZ 12-08-2003, 12:31 PM I am a little confused on which carbides to get for my MachZ and MXZ... I see 4", 6", and 8" carbides all offered for both models.. My doo's have the original skis and carbides. Not sure which to get. Are there different sizes for different cornering performance??? spinner 12-08-2003, 12:48 PM if you have studs, you should go with at least a 6 inch, if no studs just go with stock...... rotaxlover 12-08-2003, 01:45 PM The longer the section of carbide insert the more front end bite. If you do not run studs in the track I would stay with 6" carbide. Depending on the number of studs, you could run up to 10" of carbide. drewalt 12-09-2003, 07:18 AM The longer the section of carbide insert the more front end bite. If you do not run studs in the track I would stay with 6" carbide. Depending on the number of studs, you could run up to 10" of carbide. Ya, what he said.... | ||