|
|
||
|
800 03-18-2002, 02:16 AM I HAVE 2000 MXZ 700 AND IM GOING THROUGH ALOT OF BELTS HAD MECHANIN LOOK AT IT SAID IT WAS ALIGNED BUT FOUND IT DID NOT HAVE PLAY ON THE SECONDARY *SO HE SAID HE FREED IT UP *BUT WITH ANOTHER 600 MILES ON IT *IWENT THROUGH 1 BELT AND LOST A LOT OF LOW END ON ANOTHER *PLUS THE SECONDARY IS NOT FREE WHAT COULD IT BE PLEASE HELP Gunner 03-18-2002, 09:40 AM Where I'd start: - check the torque stopper. Make sure nothing is cracked *around it and no play. - open the chaincase and make sure all is well there. - buy an alignment bar and do it myself - take the secondary apart and clean it Good luck. Post your results. rotaryvalvesrule 03-18-2002, 02:25 PM THE SKI-DOO ALIGNMENT BAR PART # FOR A 2000 MXZ 700 IS 529-026-700. I SHIM MY SECONDARY TIGHT AND DON'T ALLOW IT TO FREE FLOAT. THE SHIMS ARE AVAILABLE AT YOUR SKI-DOO DEALER. I HOPE THIS HELPS. | ||