Just bought a ACE m10 suspension haveing a little trouble getting the ace to home out pushing the positve and negitive selecterbutton

you have to hold both at the same time for 4-5 seconds before it will calibrate its self and remember to keep the revs up while doing it .3000 + let me know how it works for you.i`ve had mine scince 99

if the above post dont work call fast andthey have a way so you can hook a 12 volt battery up to the motor only to make sure it works. I have had mine since about 98-99 and it works pretty darn good. One time it got messed up and needed the rear shock taken off and I had to turn the clevis to free the unit up. You might want to try that. pull the lower shock off and see if you can turn the clevis by hand if not its locked up. The clevis uses right hand threads just like a bolt

thanks for the info, I think i'am having a ignition interference problem keeps coming up with a code 33

are both sets of wires connected in the rear sensor and motor ? also the bypass for the remote ? check your connections, also is your clevis in or out on the rear shock?if you want i can pm you my phone #for trouble shooting this.Mark
by the way you aren't putting this in a yam are you ???

No it is on a big bore 97 storm