was out riding on the lake today and sled ran okay but didn't want to do more than about 75 mph.i stopped and let it sit for a while and then it wouldn't start was flooded,ever since then it keeps flooding itself and i have to pull the drain plugs and the spark plugs to drain it then it will fire right up but doesn't run properly.seems to only run on 1 cylinder then it will take off,then it will only pull to about 75 mph if your lucky....any one have any ideas what might be causing these problems???????????????

Try a brand new set of plugs...might just do the trick...

thanks russ but.........................turns out i got 2 bad cylinders so thankfully its the end of the season around here,gonna do the whole top end over and tweak 'er a little more :nimrod:

hah well thats a whoooole lot worse than just some plugs...

so thankfully its the end of the season around here

i like this! always looking at the bright side....

just started to tear the engine down and noticed that the two cylinders that are low on compression are leaking oil out through the exhaust......could this be a base gasket problem that started this problem???????