psi stage 1 or 2 pipes(whick do u guys prefer) or cpr pipes, also where can i find kick ### airfilters. one more question what is the cpr website.

http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/wink.gif * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *thanks

I have the stage 2 modblaster. *Only difference between the stage 1 and stage 2 is that 2 comes with silencers. *You can go to their website (psiperformance.com I think) and check out the difference between them for sure. *You can also get kick azz filters from them(PSI)also.
As for the CPR pipes, I haven't tried them so I couldn't give an opinion on them. *Toydoc seemed impressed though. http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/wink.gif

i already have a mbrp stinger so would that work, i mean it fit in with stock pipe setting. also how much are the genesis carbs, 42mm, i love the i dea of the no jetting thing. it would make my life a #### of alot easier to make a click or two on each carb rather than taking them apart and changing jets in the freazing azz cold.

You will like any of the 3. PSI Stage 1&2 should dyno about the same, the 2's should work better with mods.
Last I checked the PSI carbs are $500+ each.
For $1500 go with a big bore and stock carbs.

If the mbrp silencer worked with your stock pipes the stage 1 PSI pipes should line up with your silencer. *I'm not sure if the stage 2 pipes are a little different shape, or just come with their silencers....
One thing to remember is that you will have to make clutching changes with aftermarket pipes. *I think PSI's clutch setup to go w/pipes runs around $125 or something.
As for the carbs, like Toydoc said, they are very spendy! *For that kind of money I would go big bore all the way! http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/wink.gif



Last edited by phazerhater at May 13, 2002, 5:01pm

If you want a set of bigger carbs, I have a set that are bored out to 39.5mm. They are standard round slide carbs. Kevin