Topic says it all.
1996 ZR580 efi non-ett rear suspension broken bulkhead

fox shocks (serviced just before broke sled. all good except little air in back shock, dealer said not necessary to service)

Motor runs strong. Had intermittent starting problem which turned out to be a sticking fuel pump relay. (That took a while to find :bash: )

Hood is in fair shape. Cracks in front have been repaired and are visible but hood is strong. (Buddy didn't latch hood in back of truck and it flipped foreword- all the way.)

Rear suspension has had one spring replaced.

Track- SOLD

Skiis- SOLD

Primary clutch- SOLD

Pass side control arms- SOLD

Track drivers- SOLD

Rear heat exchanger-SOLD Front one still available although it was repaired <read CHEAP>

Windshield- SOLD




email joezr2@msn.com
Located in Erie, PA

Need to sell EVERYTHING. PLEASE HELP ME GET IT OUT OF MY GARAGE!!!

Joe

Can send pics of anything needed.

How much for the engine? a buddy of mine is looking for one. Kevin

Originally posted by sleddinfool@Sep 2 2004, 08:45 PM
How much for the engine? a buddy of mine is looking for one. Kevin
343168



Let me get the engine compression checked first. The dealer serviced it last year and said it was in great shape and I rode only a few times since then but I want to at least get a compression reading for someone. I want to make sure it&#39;s good. I did put some 2 stroke oil in both plug holes after the motor came out of the sled and pulled the rope a few times to coat the cylinders.

Also by motor, I assume you mean motor, including everything attached? (Stator, oil pump, etc.) Sorry, I&#39;m new at this.

Do you still have the hood?...May be interested...please email me at OneSkiTDT@cs.com or call me at 330 856 3408 ask for steve...I live in warren OH...not far away at all!!

OneSki

BTW...Green or black hood!...Thanks

Originally posted by joezr2@Sep 2 2004, 11:13 AM
Topic says it all.*
1996 ZR580 efi non-ett rear suspension* broken bulkhead

fox shocks (serviced just before broke sled. all good except little air in back shock, dealer said not necessary to service)

Motor runs strong. Had intermittent starting problem which turned out to be a sticking fuel pump relay.* (That took a while to find* :bash: )

Hood is in fair shape.* Cracks in front have been repaired and are visible* but hood is strong.* * (Buddy didn&#39;t latch hood in back of truck and it flipped foreword- all the way.)

Rear suspension has had one spring replaced.*

Track is in fair shape. A couple studs ripped out. I removed all the studs in the outside belts after one went through a heat exchanger.* Track is not separating.* 121 X 15 X .875* * Probably good for a low horsepower sled to be safe.




Skiis- SOLD

Primary clutch- SOLD

email joezr2@msn.com
Located in Erie, PA

Need to sell EVERYTHING.* PLEASE HELP ME GET IT OUT OF MY GARAGE!!!*

Joe

Can send pics of anything needed.
343074



how much for the rear suspension.....have fox shocks?

Email sent to Steve


The rear suspension does have Fox shocks. $300 for the rear skid including the shocks. I&#39;m pretty sure all the bearings are good. I replaced a few before last season. One rear spring was replaced and the front arm was welded two years ago. THe limit straps are new too. It has green wheel covers and the purple slides should be still good too. I&#39;ll check it over tonight and take pics. Where should I email the pics?

Joe

I will be needing a number of parts. I&#39;m assembling a list this week.

I need:

air silencer boot
metal strap over top of battery to hold it down
reflector on left side rear of tunnel
belt(s)
windshield
hood screens
upper and lower front susp a-arms, left side
both front shocks
cap for white plastic coolant overflow tank
ignition and key
gas cap/float assy
bracket-hinge at front of belt guard

I forgot--this is the air silencer boot:

email sent to brandon

I forgot I need trackshaft w/drivers, too.

got those too.
will send pics tonight

anything left?

email him at the address in his post. he&#39;s got parts left.

Topic says it all.
1996 ZR580 efi non-ett rear suspension broken bulkhead

fox shocks (serviced just before broke sled. all good except little air in back shock, dealer said not necessary to service)

Motor runs strong. Had intermittent starting problem which turned out to be a sticking fuel pump relay. (That took a while to find :bash: )

Hood is in fair shape. Cracks in front have been repaired and are visible but hood is strong. (Buddy didn&#39;t latch hood in back of truck and it flipped foreword- all the way.)

Rear suspension has had one spring replaced.

Track is in fair shape. A couple studs ripped out. I removed all the studs in the outside belts after one went through a heat exchanger. Track is not separating. 121 X 15 X .875 Probably good for a low horsepower sled to be safe.

Skiis- SOLD

Primary clutch- SOLD

email joezr2@msn.com
Located in Erie, PA

Need to sell EVERYTHING. PLEASE HELP ME GET IT OUT OF MY GARAGE!!!

Joe
[quote]
Can send pics of anything needed.
343074

sent pm about track

Sent pm last week. Track is sold.

Most parts still available. Updated sold parts in original post.

How much for the engine and how many miles? Need engine naked...No thing but the block assy...No stator no exhaust or wiring...

How much for the snowflap shipped?

Originally posted by sleddinmi@Oct 26 2004, 07:49 PM
How much for the snowflap shipped?
357063



Snowflap is gone, and all people interested in the engine wanted the whole thing so I&#39;d rather sell it that way. I will take $700 for the engine and all peripherals (exhaust, wiring harness, etc.)

Still lots left!

Email me for parts/pictures/questions
Joe

Email sent!

email sent about belly pan and compiling list of parts remaining.


Thanks for looking,
Joe

I&#39;m looking for a belly pan for a 1995 ZR 580. Let me know if you have one and how much it would be shipped to Minnesota 56374. Thanks............Jamie

Motor and everything that goes with it (exhaust, wiring harness, throttlebodies, etc) first $600 cash takes it.

(I want new snow tires for my truck.)


Joe

joezr2@msn.com

Still other parts available. The belly pan is cracked in the middle and doesn&#39;t appear to be useful. (sent a couple responses but since it was popular, I&#39;d let you all know in advance)

Thanks for looking.

HOW MUCH FOR MOTOR?EMAIL ME AT VWALLEYE@HOTMAIL.COM.IS THE SEAT STILL AVAIBLE?

Sent you an e-mail today (11-28-04)
Thanks,
Dan

Emails sent to both above.


efi Motor alone: $500
efi Motor with ALL perhiferals (pipe, throttle bodies, cpu, etc) $600 +shipping

Still have parts left.

Fox shocks $50 a piece or all 4 for $150

Rear skid w/o shocks $150

Hood (has been repaired- not great) $20 have pics

Speedo & tach $25

one set of front control arms $35

Sway bar $10

headlight assembly w/ bulb $15

Steering shaft incl arm on bottom & handlebars $25

Seat (cracked on sides have pics available) includes gas tank $10

Fuel pump (in tank) $45

Plenty of random parts left tooemail me and I&#39;ll let you know if I have it.


Home email joezr2@msn.com
Thanks for looking
Joe

hey lance, me again. Just bought 95 zr with a f-d up hood.
Can you send some hood pics to me performancex@usa.com
thankx.

No problem. I&#39;ll send you the pics tonight when I get home.


How&#39;s the new project coming? Did you get all that other stuff installed yet?

got it all together and sold it.
here&#39;s how it turned out: http://performancex.tripod.com

Glad it all went together for you.

Let me know when you get the hood pics.

Joe

I haven&#39;t received any pics yet. Did you get my address right?
Type carefully
PerformanceX@usa.com

Hey Joe . Replyed to the e-mail you sent me.

What parts are left? Never got an email.

wheeling_on_3@yahoo.com

Originally posted by sleddinmi@Dec 3 2004, 08:21 PM
What parts are left? Never got an email.

wheeling_on_3@yahoo.com
370906


I&#39;d like to point out I HATE msn email. Their photosharing is crap and multiple pics are very difficult to send especially with dialup. I will resend pics of the hood, shocks, brake parts, etc requested above. All pics will be sent in separate emails- one email per pic.

As far as the list of parts, I also posted them on the 2nd page of this thread; There are of course tons of misc parts too that someone may need, like chassis parts (that can be removed), brackets, reflectors, steering parts, I even have a box of random bolts I&#39;d throw in if someone wants em.
Here&#39;s a non-complete list again:

efi Motor alone: $500
efi Motor with ALL perhiferals (pipe, throttle bodies, cpu, etc) $600 +shipping

Still have parts left.

Fox shocks $50 a piece or all 4 for $150

Rear skid w/o shocks $150

Hood (has been repaired- not great) $20 have pics

Speedo & tach $25

one set of front control arms $35

Sway bar $10

headlight assembly w/ bulb $15

Steering shaft incl arm on bottom & handlebars $25

Seat (cracked on sides have pics available) includes gas tank $10

Fuel pump (in tank) $45

Plenty of random parts left tooemail me and I&#39;ll let you know if I have it.

got your hood pics and emailed you back, thankx

Originally posted by performancex@Dec 7 2004, 09:36 AM
got your hood pics and emailed you back, thankx
372211




DOES ANYONE KNOW HOW TO SHIP A HOOD?!?!?!!??!?!?!?!

I&#39;m getting estimates of $60 to pack it and then $100 to ship it!!! That&#39;s a he11 of a lot more than I was going to sell it for.


Any ideas would be greatly appreciated.


<EDIT> It appears Greyhound will ship a hood for about $30. It has to be boxed and filled with foam peanuts to protect the hood. (THat&#39;s a big box and a LOT of peanuts!) They put it on a bus so it has to be picked up in a city they have a station in.

Just figured it would be useful info for others.

Muffler- SOLD

Silencer- SOLD

Shocks- SOLD


Motor now only $500 including wiring, throttlebodies, etc - NO EXHAUST as it was sold

email sent for fuel pump

steering shaft, handlebars, throttle block SOLD

fuel pump SOLD

Handlebars, steering column- SOLD

Engine still available?

Yes, the engine is still available. I see you are in Wisconsin. Shipping seems to be the biggest obstacle. It will cost over a hundred dollars to ship this engine.

If anyone has shipped an engine cheaper or has ideas on this, I&#39;d be glad to hear them
http://forums.corvetteforum.com/images/smilies/lurk5.gif

how much for the flywheel & stator

I want to sell the motor complete.

You still have the front exchanger?? Send me a pic if you do... I sort of need one!! lol
But I think mine is different, at least it is by part numbers!

Thanks,
Greg

Originally posted by ZR Rider@Feb 21 2005, 09:57 AM
You still have the front exchanger?? Send me a pic if you do... I sort of need one!! lol
But I think mine is different, at least it is by part numbers!

Thanks,
Greg
404168



I do have the front exchanger but it has been repaired. If you put a stud through yours, I suggest JB weld.

I had a rip at an outside lug leaving a "flap" of track with a stud in it. With every revolution of the track that stud hit the exchanger. It cut a groove through all of the fins about 1/4" wide and finally made it to the exchanger itself. If yours had a similar incident, make sure the area you are repairing is CLEAN. Then fill in the area with JB weld. It&#39;ll at least keep you riding till the end of the season.

That said, mine is repaired but does not leak. If you still want it, I&#39;ll send you a pic and you can have it for $20 + shipping. I&#39;d say try to repair yours though.

Let me know,
Joe

Thanks Joe... mine sounds the same as yours! Besides, they part numbers are completely different, even the hose locations are a bit different.
I&#39;m going to bring it int to our shop here and weld it, then JB if there is any problems!

need a flywheel, do you still have that?

I don&#39;t want to disassemble the engine to sell parts. I want to sell the motor complete so I don&#39;t have parts laying all over my garage. :unsure:

Update: the motor and pehiferals have been sold.

I only have mostly small stuff left.

If anyone around Erie needs a hood that has been repaired, I&#39;ll sell it for $15 bucks. It&#39;s completely sound. It cracked on both sides of the front when it blew all the way open. It&#39;s repaired and reinforced. few small cracks also repaired. I can&#39;t ship it anywhere so if you&#39;re local, come and get it. Heck, I&#39;d take $10. I just can&#39;t stand to throw it out becaus eit still looks decent and works perfect. I just want it out of my garage!

i need a belly pan got one? i can pick up

Originally posted by 01adrenaline800@Oct 5 2005, 05:27 PM
i need a belly pan got one? i can pick up
435105


I do have the belly pan. Let me take a look at it and make sure there&#39;s no cracks in it. How soon do you need it? I&#39;m out of town this weekend (Go Penn State!) and possibly part of next week for work.

I&#39;ll take a look tonight and let you know if it&#39;s still in good shape.

thanks no hurry not really lookig foward to changing it. :bash:

I do have the belly pan. Let me take a look at it and make sure there&#39;s no cracks in it. How soon do you need it? I&#39;m out of town this weekend (Go Penn State!) and possibly part of next week for work.

I&#39;ll take a look tonight and let you know if it&#39;s still in good shape.
[/b]

Did you get my email reply?