Looking for pipes for 98 mach z and clutch setup. Any help out there http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/thumbs-up.gif

Here is an email I recieved today. Good luck.
Caleb :

aerotax@yahoo.com

We no longer have the Crank Shop 1006.
We do have two (2) sets of race pipes for a 1000
triple.
A set of Crank Shop pipes that fit the s-2000 chassis,
as well as the dsa chassis.
Also, we have a set of Jaws pipes to fit the CK3
chassis.
Let me know if you know anyone interested.

Thanks.
Scott

DYNOMAN - The man you need to talk to is ZMachMan!!!
Send him a PM and he'll help you out.

zmachman runs crankshops pipes,I have found these to work best on the rotax engines.

Personally, and depending on what you want the sled to do (ie trail or race) I don't like how high the Jaws pipes have to spin your engine (something like 9000+rpm) The crankshop pipes keep your max rpm relatively close to stock (Perhaps maintaining some a little more reliability than spinning them very fast). I do know though, that Jaws claims that their pipes will put a stock mach at around 170 hp.


* * * *I believe Limskii runs Jaws pipes on his Mach, and I know ZMachMan runs exclusively Crankshop.



Last edited by Rocketman at June 15, 2002, 08:14am