The 05 M6 don't seem to have a front torsion bar to keep the front of the sled flat in the corners. It has the hole in the body but there is no tabs welded on the A arms. Is the Fox front shocks connected in the valving to act as the same as the Tbar?

My dad has a touring sled and it didn't come with one but when adding one it was a much nicer corner carver.

I just don't want my new M6 to roll over on her door handles going into the corners on the trails.

I actually removed my sway bar for the first time this fall. I had a hard time side hilling with it in. I have spoke with many mountain riders and 90% said to remove it. It will take some time to get used to it.

Actually having the T bar in there fights you while your riding in powder. You need to lay your sled on the side to turn and carve the powder. The bar will try to keep the sled flat when you want to be leaning over.

How do you guys like your sleds on the trails with out it?

How do you set up your shocks to keep it from going greasy side up in the corners?

Don Out........