Hi

I recently purchased a set of precision skis from a 2005 REV for my 1998 Formula Z 670 and i was wondering how i mount them on my sled. Right now i have the two precision skis with the mounts but i don't have ski bolts.

Do i need to go buy new M12 ski bolts and bushings for the ski mounts, because right now the skis are setup for M10 bolts with its current bushings.

I know i will need spacers, but will i need anything else ?

Thanks for any help !! :)

You'll need the spacers and the larger bolts,that's it

i did this but i bought mine new with the bridge kit. you need a longer bolt. same diameter ad stock FZ bolt only longer. hint leave the stock bushings in the spindle and use the middle spacers in the bridge put in from the inside out. then all is well.

you may want to get a good set of flex skis for powder or keep the stock ones. i just took the sled out for a ride today & the precision skis are not so good on powder.