:bash: Triing to set up carbs... first timer... i keep fowling plugs. does anyone know what the jet specs are, and the air screw settings are for this year and model? i seem to be fowling the plugs at idle. also the jet size on this sled is different on pto side and mag side, which is bigger? THANKS...

95 FZ 583 specs you ordered :)

PLUG GAP 0.018inch

Carb 2x VM 40 69

Main jet 340 both sides PTO&MAG

Needle jet-224 AA-6

pilot jet 40

needle-clip position 7DL7-3

float 18.1mm /0.71 inch

Air screw 1 turn

idle 1800-2000

So as you can see your jetting is night right if both carbs are diferent

hope this helps

thanks freezerburnt , i will try to put this new found knoledge to good use. let u know how it goes...Thanks again.