prox440
08-03-2002, 05:24 PM
Where Can I find a new or used polaris 600cc eng. I have a pro x 440 fan and want to put it in that?
|
|
||
|
: Where can i find a new or used 600cc eng. SNORAT 08-03-2002, 05:47 PM I am not sure but I donot believe the prox fan has any heat exchangers. If so it would be cheaper to get a dif sled. As far as finding a motor post in the classifieds. XCR583 08-04-2002, 03:35 AM Keep an i out on Ebay. They are on there occasionally. But like Snowrat said you probably dont have heat exchangers so you will have to come up with a cooling system. You would be better off buying another sled http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/confused.gif SNORAT 08-04-2002, 02:10 PM I forgot to mention That if you do find a 600 motor and plan to make the swap you must get the complete engine wiring harness also because of the dif in electronics between the two along with the cdi for the 600 motor that you pick up. Sled Dogg 08-05-2002, 11:15 PM It's about impossible to do that swap.You'll spend ALOT of money buying all of the needed parts that a fan doesn't come with. Caleb Champ, The Big Red Dog 08-10-2002, 01:38 PM I have a 2002 600 XCSP. *Was thinking about selling the engine so I could buy a 03 800. *I can sell the engine, carbs, drive clutch, CDI, cooling hoses from tank to engine, motor mounts, pipe, silencer, basicaly the whole #### longblock for $2500.00, plus shipping (If needed). *It has 770 miles on it. To fit in a 440 fan, you would need to buy the three exchangers for the tunnel, coolant hoses, bottle, etc. *Wiring should be straight forward with some modifications. *If you can't hook up the premium switch, remember that the CDI always defaults to premium mode. Myers Racing Inc 08-10-2002, 04:19 PM Like the others have said. It wouldn't be worth the $$ to make the switch. You would better off selling the 440 fan and buying a Pro X 600. Just my .02 *http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/biggrin.gif all out racing 08-12-2002, 03:38 AM I'm not real sure on this but i think the 01 fan model came with exchanger built in but they didn't have the fittings for the hoses, but if they dont u could get them at a bone yard real cheap. The upgrade would be well worth it. http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/withstupid.gif Team_Arctic 08-12-2002, 12:34 PM for all the parts if you have a sled/atv junk yard near they have some pretty good parts there just the rest of the sled is bad ancd they normally sell pretty cheap... flyntriple 08-15-2002, 06:13 PM I would sell the 440 and buy a 440 liquid rolling chassis and drop in a 600 liquid. It would cost the same and be alot more straight foward Greenclicker 08-20-2002, 07:14 AM Sell the 440 and buy yourself a prox6... mine 002 http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/biggrin.gif | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.