Im in need of a little advice, I have broken off one of the cover plate bolts on my primary clutch it broke of about 1/2" inside the moveable sheave . *any ideas what i could do

There is a tool out there that removes broken bolts ( and it's not that expensive ) *I don't recall the name of the tool, but it requires you to drill a small pilot hole into the center of the broken bolt. *The tool looks like a backwards drill bit. *All you do is screw the tool into the pilot hole and back out the broken bolt. *I would imagine you could get the tool from an automotive store.

Good luck and take ur time *http://www.snowmobileworld-s2.com/forums/iB_html/non-cgi/emoticons/wink.gif

IT'S CALLED AN EASY OUT * IT SHOULD DO THE TRICK