|
|
||
|
tork181 03-28-2005, 09:13 PM I removed the driven clutch on my 2001 xc sp 600 to grease the jack shaft I thought I had all the shims in place but it now has 1/8" side free play. Any body know what the correct amount of free play should be Thanks. John. storm rider 03-29-2005, 10:08 AM I believe that 1/8" of play is what you are supposed to have. :thumbsup: tork181 03-29-2005, 04:27 PM Originally posted by storm rider@Mar 29 2005, 11:08 AM I believe that 1/8" of play is what you are supposed to have. :thumbsup: 414630 Thanks, that's good news, now I can stop looking for the shim that I thought I lost. CompFusion 03-30-2005, 04:45 AM Your free play should be about .060" (one washer) but it is secondary to the offset between the primary/secondary clutches. This offset should be checked first and then the required freeplay be corrected after. I would suggest having a dealer check it with their alignment bar then do the freeplay. At 1/8" I'm thinking you do have a jackshaft spacer lost.... michahicks 03-30-2005, 09:12 AM Not into racing, but have top end results similar to everyone elses, and have been running closer to 1/2" end play for many years. Everyone entitled to an opinion, but I haven't seen the need for any precision here. Alignment is a different issue... xltier 03-30-2005, 05:05 PM free play isnt critical but alignment is.the free play keeps the side load off the bearing. | ||