|
|
||
|
nojo 04-05-2005, 08:10 AM I pulled my 99 500 L/C fried piston and found the cylinder to be in good shape, needing only a quick honing. Now I need to put this thing back together and need the cylinder and head torque specifications. Can anyone help? Thanks for all the feed back on the "Fried Piston" posting earlier. NOJO redlion 04-07-2005, 05:17 PM Locktight #242 to screw threads on cyl. head bolts and grease under head of bolts... torque to 29N.m (21 ft lbs) starting with 4 center bolts alternating pattern toward outside... Cyl.head cover---10 N.m (90 in. lbs) same-start with center alternating toward outside. ( Make sure you have .43mm or .017 in. feeler clearance between the two cyl. before tightening) | ||