|
|
||
|
1990Indy650 09-08-2005, 12:18 PM Hi, I have a chance to buy a 1.25 ripsaw. Will this fit my completely stock 1997 Mach Z without hitting? Thanks DooinVT 09-08-2005, 02:54 PM Should be fine as long as you dont stud it. 1990Indy650 09-08-2005, 10:45 PM Originally posted by DooinVT@Sep 8 2005, 04:01 PM Should be fine as long as you dont stud it. 431077 OK thats what i wanted to hear it is studded with 144 studs. I am not sure of the length yet. Would it hurt if i took thee studs out? They are worn but the track is like new. ndsleder 09-08-2005, 10:58 PM Originally posted by 1990Indy650@Sep 8 2005, 11:52 PM OK thats what i wanted to hear it is studded with 144 studs. I am not sure of the length yet. Would it hurt if i took thee studs out? They are worn but the track is like new. 431139 No, it will not hurt to remove the studs. You will just have 144 additional little holes in your track :D DooinVT 09-13-2005, 07:39 PM I have "read" someplace that you can get away running that kind of setup if you change to smaller drivers and re-locate the top axel(track support axel) but I'm not real sure what the correct parts are that are needed. Go over to (www.dootalk.com) you might find more ionfo there... :thumbsup: | ||