KING MOTORSPORTS
10-09-2005, 09:30 AM
CLEANING OUT THE GARAGE..........
Proline 136" ice/grass suspension(5 years old) $800
Storm crank, broken mag side rod. For parts, make offer.
'97 XCR 600SP bottom end. Includes water pump and motor mounts. Pto rod bearing feels a little tight, not sure if it's just dry from sitting. $450
(2) '97 XCR 600 pistons and rings, stock Polaris. excellent shape $25
Blue Edge X bellypan, Nice! $100
''''01 440 pro-x roller secondary, no helix - $40
Stock 2001 XCR 800 pipes, w/flanges, and muffler. nice shape. $200
'03 XC800 Head, has nicks on mag side from some ring pieces bouncing around, but easily fixable. $40
XLT 580 airbox for wedge chassis $25
'97 Storm airbox $30
(3) 34mm Mikuni carbs off XLT 580 with cables - $75
(2) 34mm mikuni arctic cat carbs off of an old Prowler $25
PARTING OUT 1995 ZRT 800 w/3,200 miles:
Replacement 3/4 lug track, less than 200 miles on track and carbide studs. Camoplast Challenger track, made for Arctic Cat as OEM. $150
Stock reeds & carb boots - $40
Driveshaft - $25
Jackshaft - $25
Rear suspension w/ Fox shock - $100
Stock airbox - $15
Oil tank - $10
Cobra windshield (nice)-$20
Heat exchangers, gouged up but no leaks. - $40
Handlebars and controls/ minus brake - $20
Wilwood brake and master cylinder/lever- $40
Tunnel & bulkhead, hood, and all of the remaining ZRT parts above, including track- $350
XC800 EDGE X Parts:
Driveshaft (no drive cogs) - $25
Jackshaft - $40
Spindles and steering levers - $30 for the pair.
Heat exchangers (all three)- $75
Steering column - $30
Call Mike Hills at 315-427-0355 or e-mail me at kpwithhp99@aol.com. Shipping not included on all items and is negotiable. Pics available of parts on request.
--------------------------------------------------------------------------------
Michael Hills (315)427-0355
KING MOTORSPORTS, Northeast Asphalt Dragsled Series, & The Oneida Lakeracers Liars Club.
Proline 136" ice/grass suspension(5 years old) $800
Storm crank, broken mag side rod. For parts, make offer.
'97 XCR 600SP bottom end. Includes water pump and motor mounts. Pto rod bearing feels a little tight, not sure if it's just dry from sitting. $450
(2) '97 XCR 600 pistons and rings, stock Polaris. excellent shape $25
Blue Edge X bellypan, Nice! $100
''''01 440 pro-x roller secondary, no helix - $40
Stock 2001 XCR 800 pipes, w/flanges, and muffler. nice shape. $200
'03 XC800 Head, has nicks on mag side from some ring pieces bouncing around, but easily fixable. $40
XLT 580 airbox for wedge chassis $25
'97 Storm airbox $30
(3) 34mm Mikuni carbs off XLT 580 with cables - $75
(2) 34mm mikuni arctic cat carbs off of an old Prowler $25
PARTING OUT 1995 ZRT 800 w/3,200 miles:
Replacement 3/4 lug track, less than 200 miles on track and carbide studs. Camoplast Challenger track, made for Arctic Cat as OEM. $150
Stock reeds & carb boots - $40
Driveshaft - $25
Jackshaft - $25
Rear suspension w/ Fox shock - $100
Stock airbox - $15
Oil tank - $10
Cobra windshield (nice)-$20
Heat exchangers, gouged up but no leaks. - $40
Handlebars and controls/ minus brake - $20
Wilwood brake and master cylinder/lever- $40
Tunnel & bulkhead, hood, and all of the remaining ZRT parts above, including track- $350
XC800 EDGE X Parts:
Driveshaft (no drive cogs) - $25
Jackshaft - $40
Spindles and steering levers - $30 for the pair.
Heat exchangers (all three)- $75
Steering column - $30
Call Mike Hills at 315-427-0355 or e-mail me at kpwithhp99@aol.com. Shipping not included on all items and is negotiable. Pics available of parts on request.
--------------------------------------------------------------------------------
Michael Hills (315)427-0355
KING MOTORSPORTS, Northeast Asphalt Dragsled Series, & The Oneida Lakeracers Liars Club.