|
|
||
|
: '01 800 Xc Sp Preformance Options? lauf 10-26-2005, 09:23 AM I bought this sled of my bro last year road it for half the season and I love it but I really want to see what all I can do to it? What do you guys reccomand I want to get a pipe and what else should i get along with it and what brands? Thanx! dajetfixx 10-26-2005, 03:28 PM My brother has a 03 proX 800 and has good luck with SLP pipes and clutching. tifa_5_2000 10-26-2005, 04:02 PM slp single pipe and flannery porting. lauf 10-27-2005, 01:42 PM Thanx guys! I'm a newb here so I posted before I actually used the search function, i've done alot of reading now and the SLP single pipe sounds like it's the best bet or maybe the twin with the cheater head? What is this you speak of? flannery porting?? dajetfixx 10-27-2005, 03:24 PM Thanx guys! I'm a newb here so I posted before I actually used the search function, i've done alot of reading now and the SLP single pipe sounds like it's the best bet or maybe the twin with the cheater head? What is this you speak of? flannery porting?? [/b] I had PSI port an engine for me and I'll never make that mistake again. I dont know if it was PSI or just porting in general but I ended up selling the sled because it was too unreliable. I'll big bore a sled before i'll port one. I will only use bolt on mods that I can take off when I sell a sled. I would call SLP and tell them what you are looking to get out of your sled. Im sure you can get the pol800 to run good! mrpolaris18 10-30-2005, 07:01 PM Clutch pipe and studs. The SLP single is the best bang for the buck on that sled. Check about clutch combos and also have your carbs bored. Taper bore those carbs and Hang on!! Clutch pipe and studs. The SLP single is the best bang for the buck on that sled. Check about clutch combos and also have your carbs bored. Taper bore those carbs and Hang on!! jtkennedy9 10-31-2005, 08:43 AM I put a Team secondary clutch on my 01 and I loved it. I thought it made a big difference coming out of corners. tifa_5_2000 11-12-2005, 10:30 PM psi went out of business for a reason. flannery is the best there is for polaris performance. hes in MI. mike | ||