I was just wondering if a 42/36 helix will fit my sled, Its a 1994 indy classic with the 488 fuji L/C engine. I need a new one mine is gettin a little beatin up after 5000 miles. I have looked at the polaris website but it only says 36.

Thanks for looking,
Ben

Hey, that 42-36 helix should work fine. Thats what I had, I also had a yellow EPI secondary spring. With 10MB 49.5 gram weights in primary, but I forget the primary spring color. When I am at home next weekend I could check what the primary was. But I also geared down 19-37 1.95 gear ratio. I was told 20-39 would be better because the gears are bigger, but I think you need a new chain then. I went the cheap way. Worked Awesome!!. Good Luck

Alrihgt thanks a lot, and if you can get the colors of the springs that would be great to. I also geared mine down to a 19th.

Thanks a lot,
Ben

Also does aneybody know what the stock weights are in the clutch. I think there like 10m or something but i need to no how much do they weigh. I have stock springs both are brand new and as of right now the stock helix but i might be gettin a 42/36 helix. I want to get new weights for more of a hole shot any sugestions would be great

Thanks agen,
Ben