|
|
||
|
: Phazer Burnout/engine Sound. akrievins 11-30-2005, 10:53 PM Very short video of my Phazer taking off. It gets a bit squirrly at the end. I'd really like to stud the track! Hear the sound of that sweet fan cooled engine! Man am I just waiting to hear that again! http://media.putfile.com/Phazer-Burnout Yamahammer 12-01-2005, 05:06 PM Excellent sound there, sounds almost like mine!, hahaa Studs would improve your traction, but you did take off preety fast there as it is, despite the spinning, and usually, a nice roost is sometimes more impresive than just traction, thats what I missed when I put the studs in. Downriver Thunder 12-02-2005, 02:41 PM You almost look a bit too big for that sled. Looks good! akrievins 12-02-2005, 03:24 PM You almost look a bit too big for that sled. Looks good! [/b] Well, I might be a bit tall for it, but I'm only 180 lbs. I'll probably end up upgrading in the next few years. Bigmac 12-02-2005, 03:35 PM Play with your suspension , let your front limiter strap out , set your front spring cam on #3 and set your rear cam on #3 Then if you realy want to you can change your main arm setting from the upper hole to the lower hole , then you will HOOK UP ! I have a 85 Phazer '' NOT STOCK '' But this is how I run mine , I just done the main arm change last year under full throttle the skis don't touch the ground . Good luck ! Even with your stock track you should be able to pull the skis off the ground . seancrazy1 12-02-2005, 06:44 PM Umm.. Can't veiw it.. Okay, it works now.. That sled has, what, 340 under the hood?? Looks slow... Can I race you.. LOL! I'd eat you.. akrievins 12-02-2005, 08:37 PM Umm.. Can't veiw it.. Okay, it works now.. That sled has, what, 340 under the hood?? Looks slow... Can I race you.. LOL! I'd eat you.. [/b] LOL, It doesn't take much of a pull at all on the throttle to get it to spin the track like that. It's a 485 fan. I've been over 130kms/hr on it and she wasn't done. It was my first month riding it. I think it would be an awesome race against your 440. Play with your suspension , let your front limiter strap out , set your front spring cam on #3 and set your rear cam on #3 Then if you realy want to you can change your main arm setting from the upper hole to the lower hole , then you will HOOK UP ! I have a 85 Phazer '' NOT STOCK '' But this is how I run mine , I just done the main arm change last year under full throttle the skis don't touch the ground . Good luck ! Even with your stock track you should be able to pull the skis off the ground . [/b] Hey, That sounds like a good idea! I haven't touched anything with the suspension yet. What do you mean by "let the front limiter strap out"? Take it off, or loosen it? | ||