|
|
||
|
ZIPPARS02mxz800sp 12-18-2005, 12:27 PM i installed rad valves on my sled on friday. and yesterday i noticed that one of the carb boots is torn. so i need a new boot now. does any body know of a dealer in the toronto area were i can purchase just the boots for the carbs. :bash: :unsure: :unsure: :unsure: ZIPPARS02mxz800sp 12-19-2005, 04:59 PM can anybody help me out i want to get out for a ride i hope by the weekend. :christmas: CORY9 12-19-2005, 08:23 PM Cal Jet usually has a good stock of parts. Have you tried Royal Distributing on-line? If they have them you'll usually get it the next day. ZIPPARS02mxz800sp 12-19-2005, 09:40 PM cory i went to CALJET today no luck. i will try royal now thanks rotax800 12-20-2005, 07:26 PM Give Bennet Marine a call :D revrnd 12-20-2005, 08:25 PM Give Bennet Marine a call :D [/b] Is your smilie supposed to represent sarcasm :wink: ? hillpounder 12-20-2005, 08:48 PM In a pinch I've repaired splits with superglue, works very well just clean the rubber with acetone 1st. If the spacers are making it so difficult to remove the box that your tearing your boots, lose them, they're most likely not gaining you anything anyway. ZIPPARS02mxz800sp 12-20-2005, 08:59 PM In a pinch I've repaired splits with superglue, works very well just clean the rubber with acetone 1st. If the spacers are making it so difficult to remove the box that your tearing your boots, lose them, they're most likely not gaining you anything anyway. [/b] hillpounder i thought of the glue idea. :) i dont want to take a chance. :ohmy: no body sells just the boots just the complete kit. its really pissing me off. i ,ve emailed boysen 3 times no reply i,m ready to take them off and go back to stock my stock reeds didnt look to bad but i did notice the outside reedcage was all coroded on the outside looks like there rusting from the inside out. were you bolt it onto the motor Rev_Rider_03 12-31-2005, 02:17 PM Boysen comes with a intake boot that is aluminum. I just bought a new boot at the Stealer ship and it cost me 156.00 for one. It came with new valves and all. I wish I would of known about the intake boots coming with the after market valves, VForce or Boysen, I would of got them instead. hind sight is 20/20. ZIPPARS02mxz800sp 12-31-2005, 02:28 PM yours are different from mine. i have the aluminum intake but there is a seperate rubber boot between the intake and carb and thats what cracked on mine. i also installed spacers at the same time and i had a hell of a time getting the airbox back on and i thats what cracked the boots. i emailed boysen and there going to send me 2 new boots. oh i just looked at your pic that is the stock set. | ||