skoal_mint
03-12-2006, 04:29 PM
i got springs for my sled..the colour is gone but i found the chart on ronnies
what would give me a little higher rpm engaugment..
yellow/yellow
red/yellow...or it might be red/red
thanks
uncle neil
03-13-2006, 10:02 AM
don't have spring color chart in front of me.
if you have a:
130-260 primary and want more engagement rpm use a 160-260
all you have to do is use a spring with a higher installed load and leave full shift load the same,clutch will have to turn more rpm to engage onto the belt
01MachZ
03-13-2006, 11:28 AM
don't have spring color chart in front of me.
if you have a:
130-260 primary and want more engagement rpm use a 160-260
all you have to do is use a spring with a higher installed load and leave full shift load the same,clutch will have to turn more rpm to engage onto the belt
[/b]
BANG on uncle neil..... great advice
skoal_mint
03-13-2006, 02:06 PM
thanks for the reply...i took my mach1 one clutch and put the spring into my other clutch...i the spring feels just a bit hard to compress with my hand...so i will try it
by the way, my touring clutch spring was all black with two red dots of paint...
i take it that mean its red/red...the mach1 was two dirty to tell
dooman
03-13-2006, 08:56 PM
red-red 70-170, yellow yellow 100-230, red-yellow 70-230 higher engagement of the three yellow-yellow. downfall it will rev higher up top with the 230 finish