800ski
10-01-2002, 05:49 PM
Does anybody know what the piston clearance is on the 98 mach z?
SWRules
SWRules
|
|
||
|
800ski 10-01-2002, 07:10 PM Sorry I need the Squish Measurments :blahblah: ballsout1 10-01-2002, 07:27 PM Stock there somewhere around .070 to I`ve seen some at .080, thats a hell of a lot. 800ski 10-01-2002, 07:33 PM Iam getting .07800 is that ok What is stock? SWRules 800ski 10-01-2002, 08:41 PM Put a teaspoon of oil in cylinder compression jumped from 125 to 150. So I need to replace the rings? Is this true SWRules ZMachMan 10-02-2002, 04:45 AM If you can, call me again. There are several things I would like you to check, which I could explain better on the telephone. ZMachMan 800MXZ 10-02-2002, 08:51 AM 800ski - This would make me think that it might be time for a set of rings. It also might need pistons. One could not tell until you tore it down and looked at the pistons and cylinders themselves. 800MXZ 10-02-2002, 08:57 AM Hey, I didn't see Zman's post. If you get a chance call Tim, he will get down to the bottom of it. | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.