switta
10-06-2002, 08:20 PM
anyone know if the front shock springs that hit the upper a arm is a problem it just rubs on them very little?
|
|
||
|
switta 10-08-2002, 10:46 PM sst ZREFI 10-09-2002, 08:17 AM Mine are clear and don't appear as though rubbing will be an issue. switta 10-16-2002, 10:07 PM i have a standard f7 / i saw a snow pro at my dealer and it's shock springs did not get larger at the top like mine do it had a good 1/4 inch clearance i do not like how they rub can i shim the top of the shock over just a bit or is it ok they rub a bit i would just like to know if any one with a standard f7 is the same as mine PLEASE let me know im sure cat know's it's ok but i want to know if any one else see's this problem ZR Sled Head 10-17-2002, 08:17 AM Its only OK if your willing to put up with it. Sounds like they need to either figure out the problem or change yours over to the sno-pro springs. If yours rub you can bet lots of others do the same. Keep at em! Rick. SnoProG 10-17-2002, 10:25 AM Why not try inverting your shock/spring like the Sno Pro's. Can't hurt. I will look at my bud's Patriot compared to my Sno Pro F7 and see what I can see. Sno Pro setup http://members.aol.com/snopickle/springsp.jpg Standard setup http://members.aol.com/snopickle/springstd.jpg ZR Sled Head 10-17-2002, 10:52 AM Looks like they just plain goofed on the stn setup (or put the springs on upside down). Does it look like enough clearance to invert the spring? From the picture it looks like there isn't. switta 10-17-2002, 09:42 PM what if you fliped the whole shock around ? less unsprung weight ?? the standard in the picture is just like mine so yes i bet their are alot more like it i think i will try to flip the spring over and see how it looks . thank's for your replys ZR Sled Head 10-17-2002, 10:36 PM I don't own one but would be very interested as to what you find. Please post your results. :) Rick. switta 10-30-2002, 11:20 PM i rode my f7 this weekend . this sled rocks !!! almost fliped it over !! i chould not belive the power diff between my 00 zr . my shock springs have about a 1/4 inch clearance now guess they just had to find there resting point :D i don't think it will be a problem ? but now i wounder about the tunnel cracking??? and the sway bar it only makes sence it lifts the inside ski when in a cornner it should turn better without it ! ATOMICAT 10-31-2002, 09:40 AM Can't flip the spring. Tried it, it doesn't work. There's very little spring clearance. | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.