|
|
||
|
Yamablue 10-10-2002, 03:46 PM Does anyone know where I can score the AD Bovin suspension mod for the C-7 rear skid. The sled in question is my spare 96 Formula III 600. I saw it on their website but is says it has been discontinued. Has anyone on this forum used that mod, kinda curious how it improves the Horse Sh*t ride. Thanks guys. Mikadoo 10-10-2002, 07:21 PM Take the C-7 out and set it out to the road for the junkman. No really, just go to a swap meet and pick up an old SC-10 and some boivin connectors for a leaps and bounds better ride. The price has really dropped on them with the new SC-10 ll & lll out. wallyh 10-10-2002, 09:20 PM i put it in my 94 z and still have it i say that it still rides better then my 2002zx800 wally mxzdude 10-11-2002, 11:28 AM I had the Boivin up-grade on a 95 STX with the C-7. What an improvement in the ride ! Well worth the money and time. I think it would be a bit heavier than putting in an SC10. The SC10 will probably be easier to find. 800MXZ 10-11-2002, 12:12 PM You can find near new SC10II and III on ebay quite a bit for $350 - $500 The bovine kit cost like $600 back then Mikadoo 10-13-2002, 10:26 AM I just seen SC-10ll at a swap meet for $350.00 I should have bought it just to make some money. :( 2dooski 10-13-2002, 10:58 AM why not put an m-10 trail under that sled it only $799.00 just my thought. :hallo3: FormulaDan 10-14-2002, 01:01 AM Has anyone actually switched suspensions? What is involved with it? Thanks- Dan performancex 10-14-2002, 03:47 PM Just yesterday I was looking at a c-7 to sc-10 conversion. All it takes is new brackets under the tunnel for the rear arm. If anyone needs dimensions I could certainly get them. dooman 10-14-2002, 03:50 PM personally,I think the c-7 was a better skid for cornering than the sc-10.they just was not great on rough trails. Mikadoo 10-14-2002, 04:41 PM You really dont need new brackets, just move the old one's back. It sucks drilling out all those rivits and drilling more holes but it is worth it. I remember the dementions being 25" from center to center. Dooman is right, the old C-7 was a better handler on the corners and also a good drag suspention but for the ride the SC-10 with Bolivin couplers is far better. :hallo8: Yamablue 10-14-2002, 09:59 PM Hey thanks for the good info guys. I didn't realize that the mod was that expensive. I saw all the other ones for about 100 bucks so I assumed that the C-7 hop up would be similar. Like I said this is just a spare sled so forking out 700 for an M-10 is way out of the question. If I can score a sc-10 pretty cheap I would be interested in that approach though. Anyway again thanks for the info I know very little about this suspension. | ||