Clutch Tools [Archive] - Snowmobile World : Your #1 Snowmobile Forum

Snowdust

12-08-2006, 10:14 PM

Other than a threaded rod and some washers, what easy to obtain part is available to make a homemade spring compresser for the secondary.

joezr2

12-11-2006, 11:33 AM

I'm no expert here by any means but since I just did this Saturday night I'll throw this out there. After 3 hours of screaming :cussing: trying to do this myself on the sled (secondary wont come off) I used the stock bolt and washer with a larger diameter washer to compress the face plate with the rollers and the spring then rotated it clockwise to line theholes up and put the 3 nuts on. Then removed the oversized washer and installed the bolt correctly.


Snowmobile World : Your #1 Snowmobile Forum > SNOWMOBILING SECTION > HIGH TECH DISCUSSION FOR THE PERFORMANCE TUNER > PERFORMANCE CLUTCH TUNING > Clutch Tools PDA Clutch Tools Snowdust 12-08-2006, 10:14 PM Other than a threaded rod and some washers, what easy to obtain part is available to make a homemade spring compresser for the secondary. joezr2 12-11-2006, 11:33 AM I'm no expert here by any means but since I just did this Saturday night I'll throw this out there. After 3 hours of screaming :cussing: trying to do this myself on the sled (secondary wont come off) I used the stock bolt and washer with a larger diameter washer to compress the face plate with the rollers and the spring then rotated it clockwise to line theholes up and put the 3 nuts on. Then removed the oversized washer and installed the bolt correctly.