POWERHAULIC
12-22-2001, 08:29 PM
Finished the porting on the 900 cyl's tonite, hone & assemble tomorrow. then grip it & rip it!
|
DooZ 12-22-2001, 08:37 PM Awesome looking sled! This picture is about as close as I'll get to one!!! thanks DooZ kid rocker 12-22-2001, 08:41 PM MXZ900, sweet looking sled, now you have to clutch that beast! *LOL. kennypope 12-22-2001, 08:49 PM Have you ran an M-10 *on an ZX chassis before? How is it. http://www.snowmobileworld.com/forum/style_emoticons/<#EMO_DIR#>/smile.gif POWERHAULIC 12-22-2001, 09:12 PM As far as the clutch i'm going to wad the wt. to it & hope for the best till I get the 44's dialed in. Then I'll try the heelclicker kit thats on the shelf. I installed the M10 last feb. & got about 1200mi. on it, the M10 is likely the best mod I have ever done to any sled. kennypope 12-23-2001, 12:37 PM Hey I see on the floor of your shop you have very good taste in beer! Awsome looking sled, Im sure the performance will back up it's looks! :0 Rooster800ZX 12-23-2001, 05:55 PM Mxz who did your boring and stuff..im wanting to do my 800 into a 900 lemme know how things turn out! Rooster toydoc 12-23-2001, 07:42 PM Show us the porting on the 900 cyls ;) POWERHAULIC 12-23-2001, 08:15 PM Sorry this is the best I can do. I took these before assembly this afternoon. The cyl's came from another mxz that I returned to stock & sold. It needed help, ports were not equal in vol., squish too tight, compression too high. POWERHAULIC 12-23-2001, 08:20 PM another of the base toydoc 12-23-2001, 08:30 PM Was that stock cyl's that had port and squish problems, or someones handy work that came in to the shop? Do you use a program like "Port 2000" for your port specs? POWERHAULIC 12-23-2001, 08:41 PM they are crank shop cyl's & head that were poorly installed Formulaman 12-23-2001, 09:35 PM MXZ900 did you have to do anything to the crank to beef it up? POWERHAULIC 12-23-2001, 09:45 PM Nothing to the crank, but the upper half of the case needs to be machined to accept the larger dia. of the new cyls. Formulaman 12-23-2001, 09:49 PM Right on, aren't you worried about it shaking apart POWERHAULIC 12-23-2001, 09:58 PM why would you think it would shake apart? ??? Formulaman 12-23-2001, 10:06 PM just figgered with bigger pistons it would shake more maybe not huh? POWERHAULIC 12-23-2001, 10:13 PM see your own sig. for my answer http://www.snowmobileworld.com/forum/style_emoticons/<#EMO_DIR#>/biggrin.gif *:D *:D POWERHAULIC 02-04-2002, 10:56 PM finally had enough snow and time to get this think finished & tuned close. seems to run very well now, not all that tough to tune compared to some others i've done. excellent throttle response quick revs good power jerstilly 02-05-2002, 11:22 AM Why cant i see the pics of this beast??? | ||
vBulletin® Copyright ©2000-2013, Jelsoft Enterprises Ltd.