I was wondering if anyone has tried the new oil Blue marble!and if it is as good as people say it is?

Have you checked out the new dynos of the MXZX800 and ZRT800 that are up on their website www.nulubes.com? *It looks interesting to me.

I ran this oil 1156 miles this year I have seen no advantage of using this oil. They told me my power valves would stay clean and my sled would not smoke, WRONG. This oil is so thin it is like crisco oil that you would cook with, I had to turn my oil pump down 3.5 turns to allow for the difference and get a 50:1 ratio. Did you notice they are re-jetting on thier dyno charts and giving the cretit to thier oil. I have called and e-mailed them many times and they finally told me this morning they could'nt help me......

Oil viscosity changes with temperature. The oil pump should be largely unaffected by the viscosity of any suitable oil. Changing the setting to allow for a lower viscosity oil would also mean increasing the setting when running at cold temps. I don't do it and have never had any trouble with oil related problems through many dozens of gallons of oil in my snowmachines.