I have a 95 zrt 800 and I want to stuff a m-10 under it, Is it a clean fit or is there modifacations that need to be done?

a buddy of mine threw a m10 in his 97 i believe its the same chassi just make sure you get the right one i know there are a few diff setups for cat( at least i think) i dont deal with sus. a lot i have a book that tells me all that stuff for the bolt settings and spacing and things ill take a look if i can find it

If you do buy one, triple check you measurements then check em again before drilling any holes and mounting the suspension. All too many folks buy one and find it doesn't work anywhere close to what it should with the culprit being the suspension has not been located properly. I've been involved with two such disasters. If you haven't been on a sled with M-10 you should give one a whirl before laying down the bucks, its different and definately not for everyone. Not to say it doesn't work great, just different.
:)
Rick.

I have a 95 ZRT 800 with an M-10 and like it very much. Follow the instructions closely and you should be fine.