It has become a tradition that after every season I doo something to the sled...LOL

This year I added a X-Team seat cover and a new taillight . I wanted room at the back of the sled since last year I stretched it to 136. I needed to get the light off the seat. So, I made up this bracket and installed an LED light. You know me, I have to be different than everybody else. The LED light is for a trailer but works just fine on my doo and it was cheap to boot!!!!!

What doo you guys and gals think??!!??

OOPPS! Almost forgot, I added a rev rear bumper as well...my bad

Looks nice! you did some great work there

It has become a tradition that after every season I doo something to the sled...LOL

This year I added a X-Team seat cover and a new taillight . I wanted room at the back of the sled since last year I stretched it to 136. I needed to get the light off the seat. So, I made up this bracket and installed an LED light. You know me, I have to be different than everybody else. The LED light is for a trailer but works just fine on my doo and it was cheap to boot!!!!!

What doo you guys and gals think??!!??

OOPPS! Almost forgot, I added a rev rear bumper as well...my bad[/b]

Thats differant . looks good now you can carry more STUFF lol . ok you bought the rev bumper but were's the rest of it? , I still see a legend sitting there! It's funny how if you think of it long enough you'll find a way and save a few pennies to boot if your lucky , not have to buy it anyways cause you fu-bared it .

good job brian :thumbsup:

mutt

looks sweet!

But after following Jason's LED light I dont think I will ride behind one again at night..... gets snowcovered and the lack of heat that the led makes keeps it completely encased in snow :undercover:

I still see a legend sitting there!


mutt[/b]

Deb will be getting her new sled before the snow flies!! She is getting a left over 2007 blue GSX 500SS! For me, I will allways have my ZX but, I did see the new XP in person and got to sit on it.. I must say, as ugly as it is, I do like how it sits. Its a lot better than the REV IMHO. That will have to wait atleast another year if not two. I can see an all black 800r XP Renegade in my future.

Brian

I am with You ,Still love :inlove: the ZX Chassis and like the seating position on the REV XP. There may be a REV in My very near future as its a deal thats to good to turn down. w00t I am nuts :crazy: I just bought a 2000 Blade 7x2 on March 13th. I am a sucker for a sled deal.

Deb will be getting her new sled before the snow flies!! She is getting a left over 2007 blue GSX 500SS!

Brian[/b]AWESOME ! I'm so excited for her ! wtg guys ! I can't wait to see it ! Can you tell I'm excited too??



Well done Brian.....You doo good work ! Your sled looks great !

Snow4

sweet @$$ seat man? me want.

WOW looks sweet :p


after looking at your sled i really want to long track mine also :p

That really looks nice, Brian!.

Brian,

With the fabbing skills & ideas you and Durk have, I'm really surprised you don't look into starting a business doing what you enjoy.

Brian,

With the fabbing skills & ideas you and Durk have, I'm really surprised you don't look into starting a business doing what you enjoy.[/b]


That has been talked about before... :undercover:

what did you use to fill in your old tail light hole in the seat?

I used 2 pieces of aluminum. 1 is bolted to the original tail light mount and the other I covered with black vinyl and used heavy duty velcro to attach to the other piece. It was pretty simple and is stuck like glue. But I do still have the option of removing them if needed

who cares about the sled :rolleyes: . whats up with that car in the pic laying on the seat :p ? sled does look good though.

As always a JOB well done Brian! :thumbsup: -Dave

who cares about the sled :rolleyes: . whats up with that car in the pic laying on the seat :p ? sled does look good though.[/b]
:whistling: What he said !!! Got a 632 N2O shortblock up here for sale that would go right in that camaro :wink:

:whistling: What he said !!! Got a 632 N2O shortblock up here for sale that would go right in that camaro :wink:[/b]


Got a 505 on the stand. It may get a little spray too!! Remember, its just a street car winkwink

Brian

Got a 505 on the stand. It may get a little spray too!! Remember, its just a street car winkwink

Brian[/b]
Up here a 632 on the hose is a streetcar :wink: All the storys you hear about what goes on here in the Detroit area are true :ohmy: They have 7 second streetcars up here.

Can't wait to catch up with you again :thumbsup:

Nice work on the sled!

Very nice

just a thought

should add some sides to make it like a rack

Looks pretty sweet. Maybe these could be next years mod.[attachment=36379:100_2667.jpg]I really didn't get to ride it with these on here because I got a rev after I put them on. But I did have it at the lake once because my brother needed a sled (Caught his ski in the end of a culvert at 20 mph). They are much stiffer than the stock boards, and much more grip. I got these because I went a little to straight up last year and my foot came off and I landed on my shin. Ouch. Anyways, these are way "grippier" than the rev boards. You wouldn't be disappointed.

Looks pretty sweet. Maybe these could be next years mod.[attachment=36379:100_2667.jpg]I really didn't get to ride it with these on here because I got a rev after I put them on. But I did have it at the lake once because my brother needed a sled (Caught his ski in the end of a culvert at 20 mph). They are much stiffer than the stock boards, and much more grip. I got these because I went a little to straight up last year and my foot came off and I landed on my shin. Ouch. Anyways, these are way "grippier" than the rev boards. You wouldn't be disappointed.[/b]


Yep!!! I agree. I thought about the Rox Sled Treads earlier this year!!

I push the rox on any early zx chassis rider, for good reason they are worth it. I have not ripped the bibs yet (been several years too) but I see it coming.

Got my EPI clutch kit, timbersled airbox, bigger springs and hope to pick up a Dynoport big volume can by the riding season w00t I'll be looking for Kid Rocker and MXZWFO this season :wink: Can't wait to ride with you guys again :thumbsup:

Hi Brian

If you're thinking of getting the Sled Treads, don't wait too long to order them as they only make them for the ZX chassis for Doo's and have no intention of making them for the REV chassis.
(at least that's what they told me last year.) Given the width of the REV boards, I can see why they wouldn't. Being that the ZX chassis is 2 or 3 chassis models ago, there's no telling how much longer they'll produce them. When sales drop below a certain point, it won't be feasible for them to carry them anymore.

Here's a link.

http://www.roxspeedfx.com/cgi-bin/cart/sho...i?subcat_id=287 (http://www.roxspeedfx.com/cgi-bin/cart/showitems.cgi?subcat_id=287)

The mod looks great. That should make you visible in that snowstorm you're sure to leave behind you. Hehehehe.
But I think FB was referring to sides on the rear rack.
Personally, with the attachments available now, I don't really see the need for side bars on a rack.

Jeff

Got my EPI clutch kit, timbersled airbox, bigger springs and hope to pick up a Dynoport big volume can by the riding season w00t I'll be looking for Kid Rocker and MXZWFO this season :wink: Can't wait to ride with you guys again :thumbsup:[/b]
you do a doo triple convertion too? :rolleyes: I know the old poo would need it :whistling:

The work you did looks fantastic!
Even though there is the rev and now the XP, the ZX chassis still looks great!
great additions,
-Frank