I have a 93 indy 5 that i want to make all my own. I am wondering if i could clone in an edge rear with a little work? Any help would be GREATLY appreciated! :hallo1:

sure you can put a edge in the rear,but i seriously doubt the
the front ends 7-8 travel will make it handle very well.

I had thought of that, I was thinking of perhaps the trailing arms and such from xtra 10 or 12 suspension. That sound a little more realistic?

The xtra-12 will not fit on that sled as the trailing arms are about 4 inchs to long. The xtra-10 will bolt on as long is doesn't have CRC.

Thanks for the help!

try this website on for size. It has just about everything you would ever want to do with a standard indy chassis.
www.off-road.com/snowmobile/project/indy/xtra10.html
If you have a evolved chassis you can put an extra-10 in it as well. for example 94 and 96 evolved chassis use the same front end but the rear suspensions were xc-100 on the 94 and xtra-10 on the 96. just follow the guidelines in the website.