|
|
||
|
Sledneck15 11-06-2002, 08:34 PM I have a 93 Jag z with a '78 340 jag engine in it. When i open up the throttle, the speed goes up to about 85kph and the engine revs stay at 6000-6200 rpm and stays there......i know i can go faster, cuz with my 340 engin in its original frame, i could do around 70mph (my dad clocked me on the side of the highway) whats causing this? is there anything i could do to make it go faster? my friend suggested using Octane Booster and racing oil and maybe some pipes Sledneck15 11-07-2002, 06:11 AM cmon guys.....i really need your held, winter is coming and i want to make it run good ARCTICZRT600 11-07-2002, 06:16 AM It could be all in the gearing. NHIcegator 11-07-2002, 06:27 AM Zrt is right,check your gearing from the old sled to the new. Also bear in mind that the 93 probably is a bit heavier than the 78 the motor came out of. ;) SteveCZ 11-07-2002, 08:20 AM Clutching also? Just a thought? catrules2000 11-07-2002, 09:58 AM :withstupid: It could be as simple as having the Clutches rebuilt, and replacing all the old Bushings and even the Springs. A mis aligned Clutch is a bad thing! Sledneck15 11-07-2002, 03:19 PM There aligned, we checked and rechecked. I want to try a stiffer clutch spring FreezerBurnt 11-07-2002, 08:22 PM Find the gearing and secondary clutching set up of a 91-96 Lynx/Puma 340 This would probably help since your are putting a 340 in the Jag you now have a Puma 340 ??? :D | ||