|
|
||
|
: Tunnel Protector Strip Question snowman6971 01-20-2008, 10:19 AM I just picked up a camoplast track it has 3/4 lugs and I added studs, track was pre drilled for a 96 patern the studs are about 1/4 higher than the lugs, will there be clearance isues with the rad? will I need to increase the thickness on the tunnel protectors? i have a 95 mxz 440lc Thanks for your help. paul yarek 01-20-2008, 10:26 AM how thick are the stud protectors? that is the factor. rotax800 01-20-2008, 10:31 AM Measure the thickness of the tunnel protectors. If they are the stock one I would replace them. Tunnel protectors are cheap compared to heat exchangers. snowman6971 01-20-2008, 11:00 AM Measure the thickness of the tunnel protectors. If they are the stock one I would replace them. Tunnel protectors are cheap compared to heat exchangers.[/b] I`m prity sure they are stock I haven`t been under it yet. thanks I have read alot about old hockey sticks think they are a good fix? paul yarek 01-20-2008, 12:35 PM I have read alot about old hockey sticks think they are a good fix?[/b] why drill more holes? the spot for tunnel protectors is right there. snowman6971 01-20-2008, 04:33 PM looked under the sled and the protectors are still about 1/2 inch lower than the rad, I`ll get a better look when the track is off thanks for the help. doo rider 01-20-2008, 04:53 PM get the 1" protectors they are needed if you are running studs that stick up 1/4" from the track mxzwfo 01-20-2008, 04:56 PM get the 1" protectors they are needed if you are running studs that stick up 1/4" from the track[/b] What he said! snowman6971 01-20-2008, 05:23 PM What he said![/b] Perfect thanks I`ll get them. its better to be safe than sorry. does anyone know the exact name of them? and will royal sell them? snowman6971 01-20-2008, 05:35 PM found them on royals site will be getting the 1" thanks alot for the speedy help. | ||