start of winter rode for like 3 days and when i was coming to a stop the engine cut. next day found the fuel filter was leaking a little bit, fixed most of the tubing i then managed to get it to idle after crazy amount of hours trying to. when idling if any gas was applied it stopped and then i could turn it over and and idle again. i was back out at it again last night for 4 hours cleaning the carb (which was dirty kinda) and put everything back when i noticed when the primer is pulled back it is not taking any gas to spray in the carb therefore i figure it might be the reason? i don't want to ruin anything so should i take the "T" connector apart and check for clogs? or what else could it be? the connector is before the fuel filter and and the gas is flowing to the fuel filter? local sport shop wants $120 just to look at it and not up for paying that... any help would be greatly appreciated as to i am getting really fed up.. thanks in advanced

last night re tubed some of the gas lines still no progress... then took the primer out completely and finally the gas started going to the carb changed the spark plug but yet still not even turning over. any possible idea of why?

you are asking, it's not getting enough fuel into the carb??

Do you have spark if so have you tryed to put some gas down the spark plug holes try that and let us know?