BellevilleMXZ
11-08-2002, 10:20 PM
Does anyone know what the differences are? I had heard they are different.I mean length, etc, not so much cal.
|
|
||
|
: Sc10ii And Iii Shock Differences? andw1 11-09-2002, 12:22 AM My guess would be the III has longer shocks seeing as it has 13 some odd inces of travel and the II only had 10. BellevilleMXZ 11-10-2002, 05:09 PM Anyone know if the VR shocks are rebuildable? I think I got stroked on the SC10-III I bought. They don't say VR on them anywhere, nor on the rails, and are a sealed steel shock. ZIPPARS02mxz800sp 11-10-2002, 07:21 PM must have been off the trail version non gas.sport has the gas shocks. i believe. ??? ??? ??? ??? BellevilleMXZ 11-10-2002, 07:33 PM Sounds like I'm going to have to phone and have a "chat" with the place I bought it. I assume the VRs look like an HPG? Can't find a pic anywhere. andw1 11-10-2002, 07:57 PM They trail has gas shocks also, but they are non-rebuildable motion control shocks. ZIPPARS02mxz800sp 11-10-2002, 08:04 PM ok what shock is on the 02 800 sport.??? !!! !!! andw1 11-10-2002, 08:39 PM Supposed to have take apart HPG sledcrazy 11-10-2002, 09:04 PM 2002 SKI-DOO MX Z 800 SPORT model Rear Shocks HPG Take-Apart Rear Suspension SC - 10 III Front Arm Shock 1 High-Pressure Gas ( H.P.G. ) Racing Type Rear Arm Shock 1 High-Pressure Gas ( H.P.G. ) Racing Type Rear Suspension Max. Travel 306( mm ) / 12( in ) DIMENSIONS BellevilleMXZ 11-10-2002, 10:22 PM These arn't gas, just a steel grey shock, no lettering on them. ZIPPARS02mxz800sp 11-10-2002, 11:33 PM they r just oil i think what year sled did it come off for 2002 it says motion control for the trail version.not sure if its oil or gas.??? sledcrazy 11-11-2002, 12:53 AM Trail and sport model are GAS. here the specs are AGAIN 2002 MX Z 800 TRAIL Rear Suspension SC-10 III Rear Shocks Motion Control Front Arm Shock 1 Motion Control Gas Shock Rear Arm Shock 1 Motion Control Gas Shock 2002 MX Z 800 SPORT Rear Suspension SC-10 III Rear Shocks HPG Take-Apart Rear Suspension SC - 10 III Front Arm Shock 1 High-Pressure Gas ( H.P.G. ) Racing Type Rear Arm Shock 1 High-Pressure Gas ( H.P.G. ) Racing Type mkfasttoys 11-11-2002, 02:29 AM Where can you get parts for the hpg. i have a bent shaft and my dealer said u cant rebuild them. (BS they want me to buy a new one). I can rebuild them if i get the parts. we run penske gas rebuildables on our race car so we have the tools and dyno access. just couldnt find parts BellevilleMXZ 11-11-2002, 06:51 AM Originally posted by ZIPPARS02mxz800sp@Nov 10 2002, 11:33 PM they r just oil i think what year sled did it come off for 2002 it says motion control for the trail version.not sure if its oil or gas.??? Its from an 02 legend. permafrost 11-11-2002, 08:33 AM Belleville Mxz sounds like you are going to have to change those shocks Maybe you can trade with someone who thinks there mxz rides too stiff. I rode a 02 legend last year and let me tell you it is not for me. It was so soft it was pure mush. Some people might like that, but not me. BellevilleMXZ 11-11-2002, 06:19 PM I contacted the place I bought it from, and I'll see what they come up with. I told them I want what I paid for, so we'll see what happens. | ||
vBulletin® Copyright ©2000-2012, Jelsoft Enterprises Ltd.