|
|
||
|
: Ad Boivin Front Suspension Kit mudweiser 11-09-2002, 06:51 AM I recently found a AD Boivin front suspension kit for Ski-Doo (adsa) suspension. The kit relcates the radius rod location. They claim better handeling with less ski lift and reduced body roll. I thought I might try it for only $60. Has anyone ever used it? baddude 11-09-2002, 07:26 AM Mudweiser, I hope to here more on this also but I have put the kit on this summer and I have not tried it yet.(no snow).I hope it works good?Heres a picure :sly: Mikadoo 11-09-2002, 11:09 AM Rust!! I cant stand it! Paint! Get Paint! :hallo1: :( :0: mudweiser 11-09-2002, 06:52 PM Thats exactly what the kit is. For $60 it's worth a shot. If it works it should great, also added precision skis, haven't rode it in snow yet........ baddude 11-10-2002, 06:36 PM I know, I know.I have to update my picture.I have it finished now. :thumbsup: ;) ZIPPARS02mxz800sp 11-10-2002, 07:17 PM holy rust what year is that sled.? must do lots of road running. : :cussing: :cussing: baddude 11-10-2002, 07:27 PM It's a 99 mxz 600, I do alot of trailering to tug hill. Boy I can't wait to change that pic to my newer one.Holy caboly :nervous: :nervous: :0: ZIPPARS02mxz800sp 11-10-2002, 08:10 PM is that what the new REV,S are going to look like their rusting and they havnt even left the show room yet.??? :cussing: :cussing: rosco 12-20-2003, 10:25 PM baddude, How did this kit perform once you had a chance to try it out? How much did it reduce the ski lift? Did it corner flatter and stay on track or did it tend to push in the corners? baddude 12-21-2003, 08:19 AM Rosco, I can not answer you truthfully because I put the mbrp kit on at the same time with an M-10(everyone knows what that does).But I can say there is no ski lift at all and corners FLAT.It now corners like my buddies 2000 SRX.But anyway I think money well spent.Sorry I can't narrow it down for you but it handels AWSOME! :D Baddude paul yarek 12-21-2003, 10:20 AM Originally posted by Mikadoo@Nov 9 2002, 11:09 AM Rust!!* I cant stand it!* Paint! Get Paint!* :hallo1:* :(* :0: looks like the whole trailing arm should come right off. bath the sled after every ride and that will never happen. :blush: mudweiser, for $60.00 you could pay to have that kit installed and be as cheap as retail anywhere else without installation. rosco 12-21-2003, 08:02 PM baddude, I just took another look at your picture and realised that the Ski doo kit relocates both the upper and lower rod's, how far out did this incresa the overall ski stance? I am concerned with this kit I won't fit on the trailer any more. sammydogs64 01-02-2004, 01:43 PM I am very interested in this subject, can anyone aswer on increased ski stance and handling opinions? LB700 01-02-2004, 07:14 PM I am very interested in this subject, can anyone aswer on increased ski stance and handling opinions? Me too! There doesn't seem to be too much info on it on the Bovin site (at least last time I checked). Grimm 01-05-2004, 01:17 PM I don't know if this is the same kit or not, but on page 234 of teh Royal Distributing catalog, there is a widening kit for some Skidoos and Polarises (sp?). It advertises a 2.5 inch increase in ski stance. If you don't have a catalog, go to their website at royaldistributing.com Hope this helps somewhat me&mymxz 01-05-2004, 09:43 PM You can check out http://www.snowmobile-accessories.com/ for the widening kit. Don't have one but have heard great things. Just put on the suspension coupler for the sc10. Have been told it is money well spent SWRules | ||